Description

Sump Submersible Pump

Characteristics:

The 50PS series sump submersible pumps are designed for light dirty water or clean water domestic drainage jobs. Float switch are optional upon request.

Performance Range:

Max. Head: 8m
Max. Flow: 17m3/h
Power: 150w/200w/400w

Application:

1. Groundwater lowering
2. Pumping from drainage pits
3. Pumping from surface water pits with inflow from roof gutters, shafts, tunnels etc.
4. Emptying of ponds, tanks etc.
5. Farming, forestry water supply, circulation, and water changing.
6. For gardening, Aquarium, Landscape Waterfall, Water Drainage or Filtration

Motor:

Asynchronous dry motor.
At the top of motor, single-phase pumps have a capacitor housing with capacitor and sockets for the
motor cable and float switch.
Enclosure class: IP68
Insulation class: F

Installation:

1. Before installation, must check whether the cable damaged, scratched, broken. If they are faulty, must consult dealer or technician qualified to replace it.

2.The earth wire(yellow and green wire) must be earthed reliably

3.Check whether the power supply is conformed to the stipulation of nameplate before installation. Power supply connected with the pump must assembled with electricity-leaking circuit breaker. The wave of voltage must controlled with+-10% of the rated.

4.Using iron thread or hoop to make the outlet and discharge pipe tight. Then tie a rope on the handle. Cable absolutely prohibited to be as sling to move the pump up and down.

5. Don’t touch and move the pump before cut-off the power to keep safe

6. Be sure that the cable is far from the heat, oil and sharp

7. The pump must install far from the human and livestock. Warning nameplate should placed at the installation location

 

Video About Factory Production

Download Catalog

Download Center