Good Swimming Pool Pumps-XKP -

General information

Good swimming pool pumps-XKP pumps usually installed in the pools they must use as horizontal, self-priming centrifugal pumps. Installing a non-return device will result in immediate priming.For the pumps to function correctly, and the water temperature must not exceed 35 degree. The materials used in our pumps have undergone stringent hydraulic test and electrical inspections.

We usually install the pumps in accordance with the standards in effect. We decline all responsibility for the consequences of failure to comply with the installation instructions. And recommend that you comply with the electrical connection diagrams to avoid overloading the pump motor.

Pump fixing

You should make sure to protect the pumps and terminals connections form from the monist rue and possible floods.

Only swimming pools and basins can install the swimming pool pumps that comply with the standards in effect and we usually install the pump between the skimmer and the pool filter.

And usually located as close as possible to the water level to minimize the suction distance and reduce head losses.

So It is recommended not to install the pump more than 3 meters above the water level. Independently of the height of the pump above the water and the capacity of the chosen model, priming can take several minutes.