Smart Pump Switch-KG2 -

Product Features

1. Automatic Set the Starting Pressure, this Smart Pump Switch with built-in pressure sensor, it could automatic adjust the starting pressure as per the pipe system max. pressure. (“A” model only)

2.Wide Power Voltage Ranges, this control units could working for power voltage ranges from 90V to 260V and suitable for both 50Hz or 60Hz, it means this unit is suitable for global market.

3.Three Working Model: Automatic Manual and Time Control, easy change by press key

4.Time Control, this control unit could turn on pump motor as per selected time interval 1H or 6H or 12H automatically. Other time interval is optional upon ordered.

5.Wide Range of Starting Pressure: 0 to 6 bar

6.Waterproof Design, the Electronic Circuit Board produced by waterproof technology.

7.Low Power Consumption, Low Temperature Rise.

8.With function of Dry-run Protection, Automatic Re-start after Water Available, Lightning Protection

9.Water Hammer Protection (“S” model only)

10.Three Working Model: Automatic Manual and Time Control, easy change by press key

11.Plug-in and play, intelligent to adapt to all kinds of floor applications, without manual participation

Difference Between Smart Pump Switch and Traditional Switch

Floor Height Of 100meters and below cna be
Select 30A relay, sutable for 0.1-2.2kw
Plug-in and play, intelligent to adapt to all kinds of floor applications, without manual participation
Intelligent stepless regulation of start-stop pressure, without manual participation

1.Floor height of 15 meters(5 floors) and below is the main application. Or the tap water pressure is too high to regulate the pressure, which will lead to the phenomenon of not starting

Select 16A relay, suitable for 0.37-1KW
Low power selection, from top to bottom bossting will not be able to start, requiring manual reset
Layer height is higher than the factory setting, if the pump does not start or the pressure is too high, it will stop working