Domestic surface pump -

Best Domestic surface pump Structures Features:

Domestic Surface Pump Cast iron pump body
Stainless steel mechanical shaft seal (graphite to ceramic)
Brass impeller with radial peripheral blades
Superior steel or stainless steel shaft
With thermal protector for all single phase motor
Anti-rust design with brass or SUS304 fitting to prevent the rust from jamming the impeller (Optional)
Dual-voltage are available for 110/230V, 60Hz (optional)
Electronic pressure switch are available for automatic boosting system

Operating Conditions:

Liquid temperature up to 60℃
Ambient temperature up to 40℃
Suction lift up to 8 m

Motor:

Two-pole induction motor (n-2900 rpm)
Insulation Class B
Protection IP44/IP54

Spare Parts:

Installation and Application:

These are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components. Those series pumps have features of reliable, economical, low maintenance and simple to use, they are suitable for domestic applications and the automatic distribution of water from surge tanks, watering gardens and for boosting insufficient mains water pressure. Those pumps should installed in a covered area, protected against the weather.

Maintenance and Cleaning:

In normal operation, the pump does not require any specific maintenance. However,it may be necessary to clean the hydraulic parts when a fall in yield is observed. The pump must not dismantled unless by skilled personnel in possession of the qualifications required by the regulations in force. In any case, all repairs and maintenance jobs must carried out only after having disconnected the pump from
the power mains.