Garden Submersible Pump -

Garden submersible pump HGS-P series, with following big 4 features:

Pump casing made of engineering plastic
Pump can stay permanently submerged in water
With float switch for automatic cut-in/cut-out
Silent, maintenance-free capacitor running motor with thermal overload protection

Application of Garden Pumps:

Liquid handed: clear water or slightly dirty water or other liquid similar to water in physical and chemical properties
The appliance intended for pumping rainwater, fresh water, mains water and chlorinated swimming pool water.
Suitable to immersed in water for lifting water from the well or the pool, and drainage water from the basement

It must not used for the drinking water supply or for the delivery of foodstuffs.
Explosive, flammable, aggressive or health-hazardous substances and faecal matter must not pumped.
The appliance is not suitable for commercial or industrial use.
The appliance is not suitable for continuous running (e. g. permanent circulation in filter systems). It is also not suitable for use with liquids containing abrasive materials (e. g. sand) or containing mixtures of dirt, sand, mud or clay.
Any other use considered improper. Unpredictable damage can occur as a result of improper use, modifications to the appliance or due to the use of parts which have not been test and approved by the manufacturer!

The garden submersible pumps needs an area of at least 50 × 50 cm (the float switch must be able to move freely so that it functions properly).

The appliance can submerged under water up to the submerged operating depth mentioned in the technical data.

Install the appliance so that the suction openings cannot blocked by foreign bodies (place the appliance on a firm, even base if necessary).

Ensure that the appliance is stable.

1. liquid temperature: +35℃

2. immersion depth: 7m

3. diameter of particle: 5mm