Fountain Pump

Description

Magnetic Driven AC Plastic Submersible Fountain Pump HQB

The advantage of magnetic separation pump

1. Waterproof design

AC magnetic drive plastic fountain pump impeller and magnet injected into one composed of the motor rotor, There is a sleeve in the middle of rotor and the rotor fixed in the shell by high-performance ceramic shaft or stainless steel shaft. the stator sealed by epoxy resin which completely isolated with rotor.in this way the pump is completely water- proof.

2. Self-cooled and lubricated by pumped liquid

The space between stator and rotor filled with pumped liquid, it self-cooled and lubricated by pumped liquid.

3. Low consumption, high efficiency.
4. Multi-function, suitable for filter, fountain and circulation system.
5. Stable and Reliable

Pump body made of high quality plastic which is anti-corrosive and long durable.

Application of small fountain pump

Our plastic fountain pump can widely used in all kinds of fields, such as cooling system, fountain,  aquarium, arts and crafts, plumbing mattresses, swimming pool, foot massage basin, body massage bathtub, car cooling system, humidifier, air conditioner, and many other cooling, filter  and circulation system.

Performance of Fountain Pump

A clogged or dirty intake screen will greatly reduce performance. If the pump used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake. If less flow desired, adjust the flow control lever one the side of the pump or restrict the discharge flow.

Do not let the pump run when not submerged in the water. Doing so may damage the pump, always submerge the pump first, and then plug in the electrical outlet.

MAINTENANCE

To clean the plastic fountain pump, remove the front plate and the impeller, use a small brush or stream of water to remove any debris.

CAUTION IF THE PUMP FAILS TO OPERATE, CHECK THE FOLLOWING:

Check the circuit breaker and try another outlet to ensure the pump is getting electrical power. NOTE: Always disconnect from electrical outlet before handling the pump.

Check the pump discharge and tubing for kinks and obstructions. Algae build up can flushed out with a garden hose.

Check the inlet screen to ensure it not clog with debris.

Remove the pump inlet to access the impeller area. Turn the rotor to ensure it not broken or jammed.

Monthly maintenance will add to your pump’s life.

Related Important Resources: