Drainage Pump

Drainage Pump Characteristic：

WQ-K Submersible drainage pumps is an ideal pumps for construction site drainage, industrial factory and mine site drainage which with small solids and dirty, it is small size movable drainage sewage pumps with open type impeller , this series pumps made of cast iron, suitable for sewage and dirty water systems with solids, waste water, removal of treated liquid waste and tank emptying and general dirty water duties.

Specification:

Max. water temperature: 40℃
PH valve: 6.5-8.5
Liquid Gravity: less than 1.2 kg/liter
Max. size of solids should be could pass the bottom filter.

Installation:

1. Before installation, must check whether the cable damaged, scratched, broken. If they are faulty, must consult dealer or technician qualified to replace it.

2.The earth wire(yellow and green wire) must be earthed reliably

3.Check whether the power supply is conformed to the stipulation of nameplate before installation. Power supply connected with the pump must assembled with electricity-leaking circuit breaker. The wave of voltage must controlled with+-10% of the rated.

4.Using iron thread or hoop to make the outlet and discharge pipe tight. Then tie a rope on the handle. Cable absolutely prohibited to be as sling to move the pump up and down.

5. Don’t touch and move the pump before cut-off the power to keep safe

6. Be sure that the cable is far from the heat, oil and sharp

7. The pump must install far from the human and livestock. Warning nameplate should placed at the installation location