Horizontal Multistage Water Pumps-CMI

Horizontal Multistage Water Pumps mainly applicable for conveying of industrial liquid, such as mineral water soft water pure water clean oil and circula-tion and boosting for other weak chemical-industrial medium.
Cold water chiller cooling cycle
Water treatment processes
Industrial cleaner and dishwasher
Water boosting on process
Heating and cooling for industrial process
Air-conditioning system
Air freshening heater device(soft water)
Water supply and boosting (drinking water light chlorine water)
Fertilization/metering system

Horizontal Multistage Water Pumps Motor
2-pole induction motor;
three-phase: 220/380V/60Hz
Single-phase: 220~240V/60Hz
Single-phase with input thermal protector
Insulation class: F
Protection: IP55
Continuous duty

Liquid temperature :
low temperature: -20 ~ +15 ;
standard model:+15 ~+70 ;
high temperature:+70 ~+104 ;
Max.environmental temperature: 50
Max. operating pressure: 8 bar
Max. suction pressure is limited by max. Operating pressure

Do not install the pump in the sunbaked or wet place.
Install the pump to near the water source as short as possible to have a shortest suction pipe and prevent from reducing the suction.
Position the pump using the brackets.
Install the pump in dry and ventilated place to ensure safe operation.
Try to reduce the bend in pipe circuit as you can, the gradient should less than 2%.
It’s appreciated to install a vacuum meter and pressure gauge in the suction and discharge to observe the situation of opera-tion.