Intelligent pump controller -

Intelligent pump controller and traditional controllers

Intelligent pump controller	Traditional pump controller
floor height of 100meters(30 floors) and below can be	Floor height of 15 meters(5 floors) and below is the main application. Or the tap water pressure is too high to regulate the pressure, which will lead to the phenomenon of not starting
Select 30A relay, sutable for 0.1-2.2kw	Select 16A relay, suitable for 0.37-1KW
Plug-in and play, intelligent to adapt to all kinds of floor applications, without manual participation	Low power selection, from top to bottom bossting will not be able to start, requiring manual reset
Intelligent stepless regulation of start-stop pressure, without manual participation	Layer height is higher than the factory setting, if the pump does not start or the pressure is too high, it will stop working
Automatic Set the Starting Pressure, this control unit with built-in pressure sensor, it could automatic adjust the starting pressure as per the pipe system max. pressure. (“A” model only)	The fluctuation of tap water pressure will occur without shutdown or start-up requiring manual resetting of pressure
Avoid misoperation to ensure pump life, simple installation strong adaptability, reduce the return rate	if the tap water pressure exceeds the factory settings, the pump will not start and need to be resetted manually
Wide Power Voltage Ranges, this control units could working for power voltage ranges from 90V to 260V and suitable for both 50Hz or 60Hz, it means this unit is suitable for global market.	Easy to mistake action, increase the return rate, set pressure will increase the trouble of installers and users
Three Working Model: Automatic Manual and Time Control, easy change by press key	The risk of leakage exists when the application time is too long or when the application pressure is too high