Vortex Drainage Submersible Pump

Description:

The vortex drainage submersible pump serves irrigation of the gardening field, oxygen increase to the aquarium and drainage for general places, it is characterized with compact sizes, light weight and convenient use.

Vortex Drainage Submersible Pump Features:

The Vortex Drainage Pump is with fireplug adapter easy for connected to hose.
With dual seal system
The float switch can automatically control on and off without people’s supervision.
With vortex type impeller, max. solids allowed 7mm.

Application:

The pump serves irrigation of the gardening field, oxygen increase to the aquarium and drainage for general places, it is characterized with compact sizes, light weight and convenient use.

Performance Range:

Flow Rate Up to 15 m3/h
Dynamic Head Up to 18 m
Power: 0.5/0.75 kw

Operating Limits:

Maximum Operating Depth 5m below water level
Maximum Fluid Temperature Up to 40℃
Maximum Passage for suspended solids diameter 7 mm
PH value in water is 6.5-8.0

Condition of usage:

The depth for the electrical pumps below the water level is not more than 5 meters.
The temperature of the water is not higher of 40℃;
The PH value of the water is between from 6.5 to 8.5;
The grain diameter of the solids in the water is not bigger than 7 mm.

Installation:

1. Before installation, must check whether the cable damaged, scratched, broken. If they are faulty, must consult dealer or technician qualified to replace it.

2.The earth wire(yellow and green wire) must be earthed reliably

3.Check whether the power supply is conformed to the stipulation of nameplate before installation. Power supply connected with the pump must assembled with electricity-leaking circuit breaker. The wave of voltage must controlled with+-10% of the rated.

4.Using iron thread or hoop to make the outlet and discharge pipe tight. Then tie a rope on the handle. Cable absolutely prohibited to be as sling to move the pump up and down.

5. Don’t touch and move the pump before cut-off the power to keep safe

6. Be sure that the cable is far from the heat, oil and sharp

7. The pump must install far from the human and livestock. Warning nameplate should placed at the installation location