Description

Split Case Centrifugal Pump

 

Split Case Centrifugal Pump Performance Range:
Max. Head: 150m
Max. Flow Rate: 18000 m3/h
Discharge Size: 100 to 1000mm

Operating Limits:
Max. Ambient Temperature: 40

Product Features
1. Hydraulic Design
The hydraulic design of the impeller and volute casing are achieved by using latest 3D CAD and CFD software, followed by RP techniques for sand casting to verify the designs.

2. Low fluctuation in head and capacity
The impeller is of double suction design. Furthermore, the impeller has alternating vanes on the left hand suction side and on the right hand suction side, thus making the fluctuation in head and capacity during operation much lower than the usual design.

3. Two Side Drive
The KPS pumps have shaft extension in both the right hand side and the left hand side. This means the pump could be driven from either side, giving more flexibility to customers’ installation arrangement.

4. Rotor Balancing
Rotors are dynamic balanced in conform to ISO 1940/1 G6.3 before assembled into pumps.

5. Various Shaft Seal Option
Pack gland, single mechanical seal, double mechanical seals are available. Customers to specify in inquiry/order

6. Various Material Options for the wetted parts
Wetted Parts could be made in different materials to meet different application scenarios.

Specification
KPS pumps have 40 sizes, with different trimming impellers and running at different speed, KPS can supply several hundreds of options for customer’s requirements.
Suction and Discharge Diameters: Suction 150~1200mm, Discharge 100~1000mm
Capacity: up to 18000m3/h( 50Hz )
Head: up to 150m( 50Hz)
Max. Working pressure(20 ºC)
1.0 MPa    For Nominal Head <95m
1.6 MPa    For 95m<=Nominal Head <130m
2.5 MPa    For 130m<=Nominal Head (Max. working pressure=Suction pressure+ Shut-off head)

 

Related Important Resources

Video about Pumps

Download Products Catalogues

Downlaod Center