Description
High-lift Submersible Pump
Function and Feature:
SPSN series high-lift bottom suction multistage submersible pumps with stainless steel casing, will be your ideal drainage helper, suitable for the application of construction site, mine enterprises, field work , breea aquatics industries, fluid drug, drink, milk products, sea water and general caustic mediums whose physics nature is similar to water. The main parts of this pumps is made of stainless steel and PPO, which has high corrosion resistance. The frame assured the long running without overhead.
This pumps with features of long working life, easy to maintenance, complete to drain, convenience to use. Thermal protector fixed inside the motor (single phase only) can cut off the power when overheated or over current, to guarantee the security and reliability of pump’s run even in the atrocious environment
Condition of usage:
1. The maximum depth allowed in water is 5m from its center of impeller.
2. The temperature of trans medium’s shouldn’t be higher than 40℃
3. The trans medium’s PH scope is 4~10.
4. The kinematics viscosity of the trans medium is 7×10-7 to 23×10-6 m2/s.
5. The maximum density of the trans medium is 1.2 x103 kg/m3.
Installation:
1. Before installation, must check whether the cable damaged, scratched, broken. If they are faulty, must consult dealer or technician qualified to replace it.
2.The earth wire(yellow and green wire) must be earthed reliably
3.Check whether the power supply is conformed to the stipulation of nameplate before installation. Power supply connected with the pump must assembled with electricity-leaking circuit breaker. The wave of voltage must controlled with+-10% of the rated.
4.Using iron thread or hoop to make the outlet and discharge pipe tight. Then tie a rope on the handle. Cable absolutely prohibited to be as sling to move the pump up and down.
5. Don’t touch and move the pump before cut-off the power to keep safe
6. Be sure that the cable is far from the heat, oil and sharp
7. The pump must install far from the human and livestock. Warning nameplate should placed at the installation location
Reviews
There are no reviews yet.