Description
Sewage Pump with Enclose Channel Impeller
Characteristics:
SWE Sewage pumps with enclosed channel impeller, high efficient and anti-clogging, max. solids up to 30mm, with double end mechanical seal system, long working life, single phase for power up to 1.1kw float switch available.
Specifications:
Delivery: up to 75 m3/h
Head: up to 32 m
The Max. temperature of liquid: 40℃
Max. immersion depth: 5 m
Max. solids handling: 30 mm
Power supply: three phase and single phase 50 Hz
Motor Power: 1.1- 4 kw
Insulation Class: F
Protection: IPX8
Materials:
Motor housing, pump body, Impeller, Pump Cover: Cast-iron grade HT200
Shaft: Stainless steel
Mechanical seal: double end Sic/Carbon
Applications:
Drainage of waste water from the attenuation tank, purifying tank and sewage tank in water treatment plant
Drainage of waste water containing fibrous additives from leather factory and food processing factory Sewage management, accumulated water, septic tank, stock farm
Pumping sewage from hotels, restaurants, schools and public buildings
Installation:
1. Before installation, must check whether the cable damaged, scratched, broken. If they are faulty, must consult dealer or technician qualified to replace it.
2.The earth wire(yellow and green wire) must be earthed reliably
3.Check whether the power supply is conformed to the stipulation of nameplate before installation. Power supply connected with the pump must assembled with electricity-leaking circuit breaker. The wave of voltage must controlled with+-10% of the rated.
4.Using iron thread or hoop to make the outlet and discharge pipe tight. Then tie a rope on the handle. Cable absolutely prohibited to be as sling to move the pump up and down.
5. Don’t touch and move the pump before cut-off the power to keep safe
6. Be sure that the cable is far from the heat, oil and sharp
7. The pump must install far from the human and livestock. Warning nameplate should placed at the installation location
Reviews
There are no reviews yet.