Description

Deep Well JET Pump

 

Deep Well JET Pump Performance Range:
Max. Head: 100m
Max. Flow Rate: 6.0 m3/h
Power: 0.75, 1.0, 1.5 Hp

Operating Limits:
Liquid Temperature up to +40℃
Ambient Temperature: up to +40℃
Suction lift up to 35 m

Motor
Two-pole induction motor (n-2900 rpm)
Insulation Class B/F
Protection IPX4

Structures Features
Cast iron pump body
Stainless steel mechanical shaft seal (graphite to ceramic)
Noryl impeller (Brass impeller option) (505A with twin impeller)
Noryl (PPO) diffuser
Superior steel or stainless steel shaft
With thermal protector for all single phase motor

Installation and Application
These pumps are self-priming centrifugal pumps, suitable for suction from deep wells, self-priming is achieved using an ejector, housed in the jet body, which can be installed directly on the pump body or more often lowered in a well and connected to the pump body by two pipes. The total delivery produced by the closed centrifugal impeller is sent only partly to the delivery opening, the remaining water is recirculated through the ejector, which is connected to the suction chamber where it generates the necessary vacuum to draw up water from the point where the jet body is immersed.
Those pumps should be installed in a covered area, protected against the weather.

 

Related Important Resources

Video about Pumps

Download Products Catalogues

Downlaod Center