Description

Pond and Fountain Pump

Introduction:

HJ plastic submersible Pond and fountain pumps are carefully inspected and tested to insure both safety and operating performance. However, failure to follow the instructions and warnings in this manual may result in pump damage and/or serious injury. Be sure to read and save this manual fro future reference.

Features:

AC magnetic drive pump impeller and magnet are injected into one composed of the motor rotor, there is a sleeve in the middle of rotor and the rotor was fixed in the shell by high-performance ceramic shaft or stainless steel shaft. the stator sealed by epoxy resin which are completely isolated with rotor.in this way the pump is completely water- proof.
The space between stator and rotor filled with pumped liquid, it is self-cooled and lubricated by pumped liquid.
Low consumption, but high efficiency.
Multi-function, suitable for filter, fountain and circulation system.
Pump body made of high quality plastic which is anti-corrosive and long durable.

Applications:

our products can be widely used in all kinds of fields, such as cooling system, fountain, aquarium, arts and crafts, plumbing mattresses, swimming pool, foot massage basin, body massage bathtub, car cooling system, humidifier, air conditioner, and many other cooling, filter and circulation system.

Performance:

A clogged or dirty intake screen will greatly reduce performance. If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris contacting the intake. If less flow is desired, adjust the flow control lever one the side of the pump or restrict the discharge flow. Do not let the pump run when not submerged in the water. Doing so may damage the pump,
always submerge the pump first, and then plug in the electrical outlet.

Video about Factory Production

Download Catalog

Download Center