Description

Vortex Sewage pump

Characteristics& Use Range:

The Vortex sewage pumps used with single (three) phase power source, it’s complete stainless steel structure, rust free and anti corrosion. The Vortex type or double-vane impeller features powerful sewage pump disposal capability. The maximum solid diameter of passage up to 40mm on request. It can use of standard AISI SS 304 for common acid or alcali (PH value 4-10) or 316L dor sea water or chemical industry (PH value 0-12).

Application:

1.For transferring.
2.For discharging sewage.

Installation:

1. Before installation, must check whether the cable damaged, scratched, broken. If they are faulty, must consult dealer or technician qualified to replace it.

2.The earth wire(yellow and green wire) must be earthed reliably

3.Check whether the power supply is conformed to the stipulation of nameplate before installation. Power supply connected with the pump must assembled with electricity-leaking circuit breaker. The wave of voltage must controlled with+-10% of the rated.

4.Using iron thread or hoop to make the outlet and discharge pipe tight. Then tie a rope on the handle. Cable absolutely prohibited to be as sling to move the pump up and down.

5. Don’t touch and move the pump before cut-off the power to keep safe

6. Be sure that the cable is far from the heat, oil and sharp

7. The pump must install far from the human and livestock. Warning nameplate should placed at the installation location

 

Download Catalog

Download Center